I haven’t updated my blog in a LONG time, but I am still riding! Somehow life and work have kept me busy. Imagine that. It occurred to me that I have received more comments on my how-to article on Euro gears for the Vulcan 2000 than all other posts combined! It was a fun modification to do and a fun project to document. I’m glad that many have found it helpful.
I have sold my Vulcan 2000 Classic LT and replaced it with a 2014 Goldwing Level 3. I owned the Rogue for 7 years and for the first 5 I absolutely loved it. Tremendous power, stable on the highway and super reliable. But over time I realized that I really wanted the features and comforts of a touring bike. I considered upgrading the bike, but even if I had added hard bags, a better seat, suspension upgrades and more, I would still be left with a cruiser. The Rogue is an awesome bike and I loved the motor, but as time went on, the negatives outweighed the positives. The ‘Wing had everything that I wanted and more.
Finally some thoughts on riding on the Dark Side for 5 years. I installed a Goodyear Assurance Triple Tread. The tire cost half as much as a MC tire and lasted 4x as long. That’s an 8x price performance improvement. In dry or wet weather, the bike was absolutely glued to the road. Over the years, I pulled 3 nails and screws out of that tire, objects that would have certainly punctured a MC tire. Yes, you had to counter-steer more to get the bike to turn, but it wasn’t objectionable (at least to me it wasn’t). The Rogue doesn’t have a lot of ground clearance anyway, so even leaned over and scraping the floorboards I always had half the tread on the ground.
I rode Deals Gap several times on the Dark Side and I can attest that the hysteria surrounding car tires is complete nonsense. A visual inspection of the tires proved that the tire never rode on the sidewalls (and there are plenty of videos on the web that prove this as well).
The only aspect of the Dark Side that I did not like was the tendency for the bike to track to the lowest spot in the road. E.g., on a road where heavy trucks had created depressions in the roadway surface, the bike always wanted to seek the lowest spot. Other than that, I see no drawback to the Dark Side. Everyone has their opinion – all I have to say is try it, you might like it. Will I return to the Dark Side with the Goldwing? I’m not sure – I am enjoying the incredible handling of the Goldwing so much that I may or may not.
So goodbye to the Rogue community. Enjoy your ride and be safe.
In order to have more control over the look and feel of my blog, I’ve moved it from the Rogue Owners Group site to my own WordPress site. The Rogue Owners Group consists of people who own the Kawasaki Vulcan 2000 motorcycle. “Rogue” is the nickname for the 2000.
Despite the massive amounts of torque available on the VN2000, the engineers at Kawasaki chose to put some steep gearing in the bike. The net result is that you need to shift out of first gear almost immediately after starting up. Heck, there isn’t even a need for first gear. You can easily start in second. Additionally, this means that at highway speeds, you are often tempted to shift into the non-existent 6th gear because the engine is turning so fast. The gearing on the models sold in Europe however have gearing that is not quite as steep as the ones sold in the US.
So… some folks in the Rogue community have purchased the European gears and installed them on their US bikes. The good news is that this does not involve changing the gears inside the transmission. Instead, this involves swapping out the transfer gears that connect the transmission output shaft to the shaft that drives the front belt pulley. The stock US transfer gears in the transmission have 42 teeth (front) and 50 teeth (rear). The Euro transfer gears have 44 teeth (front) and 48 teeth (rear). This change in gearing creates a noticeable difference. From what I have read in other posts, with the stock configuration, the final drive ratio is 2.7439. and with the euro gears it’s 2.4545. Read More
The ONLY thing that bothers me about my bike is that it doesn’t have a model name. I bet this has happened to you. The conversation goes something like this…
“What kind of bike do you ride?”
“A Vulcan 2000”
“Oh…” (they think you’re riding a 2000 model year bike)
“Oh, how big is that?”
“It’s a 2000”
“No, I mean how big is the engine?”
“It’s a 2000”
“No, I mean the engine size”
“It’s a 2000 CC engine… 2053 to be exact. 125 cubic inches. It’s big.”
That’s when the realization slowly hits them.
People know what bike you are referring to when you mention a Mean Streak, a Nomad, a Vulcan Classic, or Drifter. But mention VN2000 and you get blank looks. It’s almost as bad as HD designations – FLXHRABCXYZ…
ROG members know what a Rogue is, but no one else does. If you could name it, what would you name it?
After 7 years on a VN 750, I picked up my new ride this past Sunday. I purchased it at Motorsports of Delray in Delray Beach FL and trailored it home. 290 mile drive from Jax but worth it. Got lots of mods planned. Will post photos as things progress. I’m keeping the 750 so that my son and I can ride together. I’m looking forward to getting past that 1000 mile break-in period…